Saltar al contenido principal

Cambios al paso #2

Editado por Angelo

Edicion aprobada por Angelo

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Remove the 3.5 mm screw from the logic board next to the rotating lens
-[* black] Invert the logic board and lens toward the orange and blue wires still connecting the logic board to the LCD screen.
+[* red] Remove the 3.5 mm screw that is next to the rotating lens.
+[* black] Invert the logic board and lens to uncover the orange and blue ribbon cables. These cables still connect the logic board to the LCD screen.