Saltar al contenido principal

Cambios al paso #8

Editado por Walter Galan

Edicion aprobada por Walter Galan

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Use the flat end of a spudger to separate the trackpad ribbon cable from the adhesive securing it to the upper case just before the hole where it passes through to the trackpad.
+[* black] Wedge the flat end of a spudger underneath the upper case opening where the trackpad ribbon cable passes is routed through.
+[* black] Gently pry the trackpad ribbon cable from the adhesive securing it to the upper case.