Saltar al contenido principal

Cambios al paso #7

Editado por Andrew Optimus Goldheart

Edicion aprobada por Andrew Optimus Goldheart

Sin cambios

Líneas de Paso

[* black] Pull the trackpad ribbon cable straight out of its socket on the logic board.
-[* black] Insert a spudger under the trackpad ribbon cable where it enters the hole in the case to free it from adhesive.
+[* black] Use the flat end of a spudger to separate the trackpad ribbon cable from the adhesive securing it to the upper case just before the hole where it passes through to the trackpad.