Saltar al contenido principal

Cambios al paso #3

Editado por Walter Galan

Edicion aprobada por Walter Galan

Antes
Después
Sin cambios

Líneas de Paso

[* black] Use the flat end of a spudger to pop the I/O board connector straight up off its socket on the I/O board.
-[* icon_caution] Be careful to only pry up on the cable connector, not on the socket itself or you risk damaging your I/O board.
+[* icon_caution] Be careful to only pry up on the cable connector, ***not*** on the socket itself or you risk damaging your I/O board.
[* black] Push the I/O board cable up to bend it out of the way.