Saltar al contenido principal

Changes to Step #2

Editado por meaghan

Edicion aprobada por meaghan

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] UsingOn the inside of the speaker panel, using a spudger, push the beige tab in the direction of the ribbon. It should only move a small amount.
[* black] UsingOn the inside of the speaker panel, using a spudger, push the beige tab in the direction of the ribbon. It should only move a small amount.
[* black] Remove the ribbon by gently pulling on it, there should be little or no resistance.
[* black] Now the speaker panel can be set aside.