Saltar al contenido principal

Cambios al paso #1

Editado por Walter Galan

Edicion aprobada por Walter Galan

Antes
Después
Sin cambios

Líneas de Paso

[* black] InsertWedge the tip of a spudger underunderneath each of the antenna cablescables, near their connectors and pry up to disconnect them from the AirPort board.
[* black] InsertWedge the tip of a spudger underunderneath each of the antenna cablescables, near their connectors and pry up to disconnect them from the AirPort board.
[* icon_reminder] The three cables are coded with black sleeves of different lengths. During reassembly:
[* blackred] Connect the long-sleeved cable to the center socket.
[* blackorange] The short-sleeved cable connects next to the screw.
[* blackyellow] The remaining cable has no sleeve, and connects in the last empty socket, next to the fan.
[* blackred] Connect the long-sleeved cable to the center socket.
[* blackorange] The short-sleeved cable connects next to the screw.
[* blackyellow] The remaining cable has no sleeve, and connects in the last empty socket, next to the fan.