Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #3

Editado por Andrew Optimus Goldheart

Edicion aprobada por Andrew Optimus Goldheart

Antes
Después
Sin cambios

Líneas de Paso

[* black] Place a reheated iOpener on the top edge of the iPad to soften the adhesive holding the GPS antenna to the rear case.
[* icon_note] The GPS antenna is essentially a sticker covering the bottom of the right cellular data antenna's compartment. As you work to pry it out in the following steps, there is a good chance that it will tear and break. If you are attempting to salvage the antenna, use plenty of heat and be very careful.