Saltar al contenido principal

Cambios al paso #3

Editado por Miroslav Djuric

Edicion aprobada por Miroslav Djuric

Sin cambios

Líneas de Paso

[* black] Use a flat pry tool (such as a flat-blade screwdriver) to prop up an edge of the subwoofer.
[* icon_note] In my case, I just used the Phillips #2 screwdriver I had on-hand.
[* black] Slide your fingers underneath the sub so that you get a good grip on its edge.
[* black] Carefully lift the subwoofer out of the enclosure, minding any wires that may be tethering the sub to the enclosure.