Saltar al contenido principal

Cambios al paso #5

Editado por Joshua Byrne

Edicion aprobada por Joshua Byrne

Antes
Después
Sin cambios

Líneas de Paso

+[* icon_note] Replacement Note: Align the DIMM in the slot on the riser card and push both ends of the DIMM down until the ejectors snap back up into place.
+[* icon_caution] Warning: FB-DIMMs carry heatsinks on either side of the DIMM. Never attempt to remove the heatsinks from the DIMMs. Doing so could damage the DIMM.