Saltar al contenido principal

Cambios al paso #3

Editado por Sam Goldheart

Edicion aprobada por Sam Goldheart

Antes
Después
Sin cambios

Líneas de Paso

-[* icon_caution] Caution: there is a ribbon cable attached to the keyboard. It will break easily.
-[* blue] Gently disconnect the ribbon cable by sliding down the tabs.
-[* black] Gently take out the keyboard.
+[* icon_caution] The keyboard is still attached by ribbon cable, don't try to remove the keyboard entirely yet.
+[* red] Disconnect the ribbon cable by pressing the tabs on either side of the connector. Pull the cable out parallel to the connector.
+[* black] Remove the keyboard.

Imagen 2

Versión Antigua

Nueva Versión