Saltar al contenido principal

Changes to Step #1

Editado por Kando Ogunrinola

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Remove all screws along the edges of the camera, using a #00 Phillips screwdriverscrewdriver.
[* icon_reminderblack] The screws should be 4.3 mm long.
[* black
] Save them for putting the camera back together
[* black] Screws should be 4.3 mm long
together.
[* red] Remove all screws along the edges of the camera, using a #00 Phillips screwdriverscrewdriver.
[* icon_reminderblack] The screws should be 4.3 mm long.
[* black
] Save them for putting the camera back together
[* black] Screws should be 4.3 mm long
together.