Saltar al contenido principal

Cambios al paso #4

Editado por Julie Pahukoa

Edicion aprobada por Julie Pahukoa

Antes
Después
Sin cambios

Líneas de Paso

-[* black] While holding the black plastic film back from the RAM slots, slide the RAM card straight out from its connection with the logic board.
-[* icon_caution] Maintain the 45 degree angle of the RAM card until all pins are disconnected. Failure to do so may result in breaking the RAM card's connecting pins.
+[* black] Hold the black plastic film away from the RAM slots. Grasp the edge of the RAM card and slide it out at a 45 degree angle.
+[* icon_caution] Maintain the 45 degree angle of the RAM card until all pins are disengaged. Failure to do so may result in pin breakage.