Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #5

Editado por Charlene Donlon

Edicion aprobada por Charlene Donlon

Antes
Después
Sin cambios

Líneas de Paso

[* black] Two ribbon cables connect the case to the circuit board. Be careful to not pull the case too hard and rip the ribbon cables.
[* black] Remove the ribbon cables located underneath the left and right bumpers with a plastic opening tool.
[* black] Completely remove the lower case from the rest of the device.