Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #4

Editado por rich

Edicion aprobada por Adam O'Camb

Antes
Después
Sin cambios

Líneas de Paso

[* black] Make sure the SD card has been removed. With a plastic opening tool pry off the lower case starting at the bottom edge and working around the perimeter.
[* black] Make sure the SD card has been removed. With a plastic opening tool pry off the lower case starting at the bottom edge and working around the perimeter.
[* red] Two ribbon cables connect the case to the circuit board. Be careful to not pull the case too hard and rip the ribbon cables.