Saltar al contenido principal

Cambios a Paso #5

Editado por Evan Cate

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Next, you must remove the motherboard from the front screen.
[* blackred] Use a Torx T-7 screwdriver to unscrew the two screws.
[* icon_caution] Before you can seperate the motherboard from the front cover, you must disconnect the wire connecting the two.
[* black] To do so, you must use the back end of the spludger to push out the two white tabs connected to the wire, that holds the motherboard and front cover together.
[* blackred] Use a Torx T-7 screwdriver to unscrew the two screws.
[* icon_caution] Before you can seperate the motherboard from the front cover, you must disconnect the wire connecting the two.
[* black] To do so, you must use the back end of the spludger to push out the two white tabs connected to the wire, that holds the motherboard and front cover together.