Saltar al contenido principal

Cambios a Paso #2

Editado por Matthew

Edicion aprobada por Matthew

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Having removed the battery, you can begin removing the outermost screws on the camera to allow for case replacement. There are 5 screws in total. This will require a Philips head # 00 screwdriver.
[* icon_note] Keep in mind that keeping tracktrack of where each screw came from is crucial for when puttingfrom, you need to put the camerascrews back togetherin the holes you got them from.
[* icon_note] Keep in mind that keeping tracktrack of where each screw came from is crucial for when puttingfrom, you need to put the camerascrews back togetherin the holes you got them from.