Saltar al contenido principal

Cambios al paso #3

Editado por Sam Winters

Edicion aprobada por Arthur Shi

Antes
Después
Sin cambios

Líneas de Paso

[title] Note battery orientation.
-[* black] Once you get the "ears" past the edge, just slide the tray the rest of the way out.
-[* black] Note the battery type carefully: It is a ML2032, which is rechargeable. It is NOT the same as a CR2032, which is not rechargeable. Putting a CR2032 in here is a recipe for bad things to happen.
-[* black] Note the proper orientation (see picture), positive + symbol facing towards bottom. Negative side facing keys. Slide the tray with the new battery back in. The battery can be oriented incorrectly and NOT work.
-[* black] If you want to make it easier to remove the battery the next time, you could trim the ears slightly. Or slice some notches in the plastic "springs" to weaken a little.
+[* black] Once the "ears" past the edge, it should be easy to slide the tray the rest of the way out.
+[* black] Note the battery type carefully: It is a ML2032, which is rechargeable. This is NOT the same as a CR2032, which is not rechargeable. Do Not replace with CR2032, as the solar panels will attempt to charge it.
+[* black] Note the proper orientation of the battery (see picture), positive + symbol facing towards bottom. Negative side facing keys.
+[* black] To make it easier to remove the battery in the future, trim the ears slightly or slice some notches in the plastic "springs" to weaken them a little.