Saltar al contenido principal

Cambios al paso #2

Editado por Sam Winters

Edicion aprobada por Arthur Shi

Antes
Después
Sin cambios

Líneas de Paso

-[* black] I used a putty knife to force the tray back out. Just push it into the gap along the bottom, then angle the handle to direct the force of the tip away from the body of the keyboard. A few taps should get you this far.
+[* black] Use a putty knife or metal spudger to pry the tray out. Insert it into the gap along the bottom, then angle the handle to direct the force of the tip away from the body of the keyboard. Tap as needed.