Saltar al contenido principal

Cambios al paso #3

Editado por Carsten Frauenheim

Edicion aprobada por Carsten Frauenheim

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Use a putty knife or metal spudger to pry the tray out. Insert it into the gap along the bottom, then angle the handle to direct the force of the tip away from the body of the keyboard. Tap as needed.
+[title] Pry open the battery tray
+[* icon_note] The ML2032 rechargable coin cell battery is located on a tray at the back edge of the keyboard.
+[* black] Insert the flat end of a spudger into the gap between the battery tray the top surface of the keyboard.
+[* black] Pivot the spudger down, towards the top of the keyboard, to begin to pry the tray out of its cavity.

Imagen 1

Versión Antigua

Nueva Versión

Imagen 2

Ninguna imagen anterior

Añadido

Imagen 3

Ninguna imagen anterior

Añadido