Cambios al paso #7
Editado por Kristin Brusso —
Edicion aprobada por Kristin Brusso
- Antes
- Después
- Sin cambios
Líneas de Paso
| + | [* icon_note] Now that you have removed all of the screws, all you have to do is carefully pull the case apart at the seem. |
|---|---|
| + | [* black] The case will detach from the camera in two pieces. When detaching them you will want to be careful not to over bend the small metal projections located along the seems. These aid in holding the case together. |
| + | [* black] You will also want to be careful not to allow dust or other particles to settle inside of the camera while the case is detached. If this happens it can cause issues functional issues in the future. For this reason it may be necessary to keep a can of compressed air nearby to aid in clean-up. |
Imagen 1
Ninguna imagen anterior
Añadido
Imagen 2
Ninguna imagen anterior
Añadido
Imagen 3
Ninguna imagen anterior
Añadido