Cambios a este Paso
Editado por Kristin Brusso —
Edicion aprobada por Kristin Brusso
- Antes
- Después
- Sin cambios
Líneas de Paso
| [title] Remove the Screws (6 Total) | |
| [* black] Now that the battery has been removed, you can begin removing the outermost screws on the camera to allow for case replacement. There are 6 screws in total, some of them are tricky to find. This will require a Philips head # 00 screwdriver. | |
| [* black] Be careful when removing these screws, as they are made of a weak material which makes striping the screws very easy. | |
| - | [* black] When removing the screws it is also important to keep track of |
| + | [* black] When removing the screws it is also important to keep track of where each screw came from. To do this, you can draw a grid pattern on a sheet of white paper and place the screws from each location into a separate grid square. Be sure to label these squares as you go along. |