Saltar al contenido principal

Cambios a Paso #4

Editado por Cameron

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* icon_note] This step is only needed for the case and logic board replacement.replacement
[* green] Using the #00 phillips screwdriver remove the screw attached to the front casing in the top left corner. Front case should easily separate.
[* icon_note] This step is only needed for the case and logic board replacement.replacement
[* green] Using the #00 phillips screwdriver remove the screw attached to the front casing in the top left corner. Front case should easily separate.