Saltar al contenido principal

Cambios a Paso #6

Editado por iRobot

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Grasp the logic board at the left edge with one hand and at the thinnest section with the other hand. Lift the left edge of the board up to approximately a 30 degree angle (if you don't have your protractor handy, just lift until the DVI port clears the right hinge).
[* black] Once the logic board clears the ports, slide it out to the left.

Imagen 1

Ninguna imagen anterior

Añadido