Saltar al contenido principal

Cambios a Paso #4

Editado por Jacob M Bassetti

Edicion aprobada por Jacob M Bassetti

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Use a Philips #2 screwdriver to removeblack] Arrange the two 8 mm screws mounting the main circuit boardtoaster and its shell so you are able to thelook inside of the shellshell itself.
[* black] RemoveLocate and remove the two 8mm screws that attach the mainshell's circuit board from the shell by simply sliding it outitself using the phillips *insert size* screwdriver.
[* red] Use a Philips #2 screwdriver to removeblack] Arrange the two 8 mm screws mounting the main circuit boardtoaster and its shell so you are able to thelook inside of the shellshell itself.
[* black] RemoveLocate and remove the two 8mm screws that attach the mainshell's circuit board from the shell by simply sliding it outitself using the phillips *insert size* screwdriver.
[* icon_note] The shell should now be completely separated from the rest of the toaster.