Saltar al contenido principal

Cambios a Paso #4

Editado por Jacob M Bassetti

Edicion aprobada por Jacob M Bassetti

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Arrange the toaster and its shell so you are able to look inside of the shell itself.
[* black
red] Locate and remove the two 8mm screws that attach the shell's circuit board (located inside of the shell) from the shell itself using the Phillips #2 screwdriver.
[* black] Arrange the toaster and its shell so you are able to look inside of the shell itself.
[* black
red] Locate and remove the two 8mm screws that attach the shell's circuit board (located inside of the shell) from the shell itself using the Phillips #2 screwdriver.
[* icon_note] The shell should now be completely separated from the rest of the toaster.

Imagen 1

Versión Antigua

Nueva Versión

Imagen 2

Versión Antigua

Nueva Versión

Imagen 3

Eliminado