Saltar al contenido principal

Cambios a Paso #3

Editado por Jacob M Bassetti

Edicion aprobada por Jacob M Bassetti

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Flipred] Flipping the toaster upsidedown.
[* red] Using
upside down, use a T7 torx screwdriver,screwdriver to remove the four 10mm screws that keep the outer shell attached.
[* black] Flipred] Flipping the toaster upsidedown.
[* red] Using
upside down, use a T7 torx screwdriver,screwdriver to remove the four 10mm screws that keep the outer shell attached.
[* orange] Flip the toaster back over and slide off the shell making sure to slide the toaster lever (now without the black plastic nub) through the lever opening in the shell.
[* black] The outer shell should now only be connected by its internal wiring.