Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #9

Editado por iRobot

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Place enough pressure on the upper case to allow you to slide a tool just within the seam between upper case and lower case as shown in the picture. A dentist's hook, push pin, or similar tool will work.
[* icon_note] Do not yank the upper case off as soon as you free the clasp. The case is attached to the logic board via two ribbon cables.
[* black] Delicately slip the tip of your tool behind the silver metal latch and pull it forward while pulling up on the case. This may take some effort.

Imagen 1

Ninguna imagen anterior

Añadido