Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Cambios al paso #22

Editado por Andrew Bookholt

Aprobación pendiente

Sin cambios

Líneas de Paso

[* icon_caution] The digitizer ribbon cable is '''extremely''' delicate. We're not joking on this. It's about the thickness of a human hair. Proceed with caution.
[* black] Use the edge of an iPod opening tool to carefully lift the digitizer ribbon cable off the two positioning pegs on the inner case.
[* black] Remove the following screws securing the inner case to the front case:
[* red] Four 6.3 mm Phillips
[* orange] Two 3 mm Phillips
[* black] Pull the same retaining tab used to secure the logic board away from the center of the Newton to release the inner case, then pull it away from the bottom of the Newton and set it aside.

Imagen 2

Versión Antigua

Nueva Versión

Imagen 3

Versión Antigua

Nueva Versión