Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Cambios al paso #17

Editado por David Hodson

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Remove the single 6.3 mm Phillips screw securing the upper half of the battery compartment to the Newton.
[* black] While lightly lifting the upper half of the battery compartment, use the edge of an iPoda plastic opening tool to release the five clips along its outer edge.
[* black] While lightly lifting the upper half of the battery compartment, use the edge of an iPoda plastic opening tool to release the five clips along its outer edge.
[* black] Lift the upper half of the battery compartment and gently lay it on the logic board.