Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y herramientas

Cambios al paso #10

Editado por Walter Galan

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Remove the four 12 mm Phillips screws securing the rear case to the Newton.
[* black] Beginning with the seam where the display cover used to be attached, use an iPod opening tool to release the three clips along the power button side of the Newton.
[* icon_caution] These clips are constructed of plastic, making them inherently delicate. To avoid breaking them, do not force the two components apart.
[* black] Continue prying along the left side of the newtonNewton and proceed to free the clips along the Newton's lower edge.
[* black] Continue prying along the left side of the newtonNewton and proceed to free the clips along the Newton's lower edge.