Saltar al contenido principal

Cambios a Paso #3

Editado por Nicolas Siemsen

Edicion aprobada por Nicolas Siemsen

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Here is the short hose off of the car.
[* black] Measure its length, and then mark that length on the bulk hose you purchased.
[* black] Use a utility knife or other appropriate cutting tool theto cut the length of hose you need to replace the old short hose.
[* black] Re-installInstall the new hose, and then re-install the thermostat housing and gasket.
[* black] Use a utility knife or other appropriate cutting tool theto cut the length of hose you need to replace the old short hose.
[* black] Re-installInstall the new hose, and then re-install the thermostat housing and gasket.