Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #1

Editado por lofkin

Edicion aprobada por lofkin

Antes
Después
Sin cambios

Líneas de Paso

[* icon_note] If you're installing a new front panel assembly, it may need the following preparation:
[* red] Peel the plastic strips covering the adhesive around the perimeter of the front panel assembly.
[* orange] Remove the small piece of adhesive backing from the digitizer cable.
[* black] Make sure all copper is covered on the new repalcement screen as once fitted without this the screen will move randomly.