Saltar al contenido principal

Cambios al paso #1

Editado por Alan Truong

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Locate the hex screws in each corner and remove them.
[* black] Rotate
that connects the display so the legs ofpanels to the display are now facing you
[* black] Grip the top of the clear panel
and lift it upwards, and pull the ADC cable through the hole.
[* black] Remove the grey back panel by lifting the bottom and pulling the ADC cable through the hole
remove them.
[* red] Locate the hex screws in each corner and remove them.
[* black] Rotate
that connects the display so the legs ofpanels to the display are now facing you
[* black] Grip the top of the clear panel
and lift it upwards, and pull the ADC cable through the hole.
[* black] Remove the grey back panel by lifting the bottom and pulling the ADC cable through the hole
remove them.

Imagen 1

Versión Antigua

Nueva Versión

Imagen 2

Eliminado

Imagen 3

Eliminado