Saltar al contenido principal

Cambios al paso #8

Editado por Reed Crosby

Edicion aprobada por Reed Crosby

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Remove the antenna cable from the WWAN card.
-[* black] Push the tabs, the card will pop up to a 45 degree angle.
-[* black] Remove the card by pulling it away from the unit.
-[* icon_note] This only applies if you have a WWAN Card, as not all computers have a WWAN card.
+[title] WWAN Card Removal
+[* icon_note] Not all devices have a WWAN Card, so most people can skip this step.
+[* black] Using similar procedures as the WLAN, disconnect the single antenna cable, push the rear clips back and remove the card.