Saltar al contenido principal

Cambios al paso #9

Editado por Elohino Theodore

Edicion aprobada por Geoff Wacker

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Close the screen completely./*** Close the screen of the laptop completely. ***
-[* black] Make sure the cables don't get squished, or damage the LCD or logic board./ ***Make sure the cables do not get damaged by the LCD screen or the logic board. ***
-[* black] Remove the two screws that are circled./ ***With a screwdriver, remove the two screws that are circled in the picture.***
+[* black] Close the screen of the laptop completely.
+[* black] Make sure the cables do not get damaged by the LCD screen or the logic board.
+[* black] With a screwdriver, remove the two screws that are circled in the picture.
[* green] The bottom screw is labeled with a "D".