Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #3

Editado por Nicolas Siemsen

Edicion aprobada por Nicolas Siemsen

Antes
Después
Sin cambios

Líneas de Paso

[* black] You can now see the trunk actuator. It connects to the lock mechanism by the metal rod with a spring.
[* red] To remove the actuator begin by removing the two hex head screws. They should be 8mm heads.
[* blackyellow] Then disconnect the two vacuum lines, making note of their orientation. One is for lock (red stripe), one is for unlock (green stripe).
[* green] Finally, pull the metal armature of the actuator off of the lock mechanism. It pulls off in the direction of the vacuum actuator body.
[* blackyellow] Then disconnect the two vacuum lines, making note of their orientation. One is for lock (red stripe), one is for unlock (green stripe).
[* green] Finally, pull the metal armature of the actuator off of the lock mechanism. It pulls off in the direction of the vacuum actuator body.

Imagen 1

Versión Antigua

Nueva Versión