Saltar al contenido principal

Cambios al paso #3

Editado por Ali Naqvi

Edicion aprobada por Ali Naqvi

Antes
Después
Sin cambios

Líneas de Paso

-[* black] There are many clips inside the device holding the plastic panel in place, so to remove it you must slide your [http://www.ifixit.com/Tools/iFixit-Opening-Picks-set-of-6/IF145-123|iFixit Opening Picks] along the edges of the panel to break or loosen the clips.
+[* black] There are many clips inside the device holding the plastic panel in place. To remove them you must slide your [http://www.ifixit.com/Tools/iFixit-Opening-Picks-set-of-6/IF145-123|iFixit Opening Picks] along the edges of the panel to either break or loosen the clips.
[* black] This may take a lot of effort, as the panel is held in extremely tight. Do not be afraid to use force.