Saltar al contenido principal

Cambios a Paso #6

Editado por iRobot

Edicion aprobada por iRobot

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Get a scrap of matching fabric to patch the baffle. Make sure you have enough fabric to cover the area you measured in the previous step, with an inch or two extra in each direction.
[* icon_note] We are using a piece of fabric that is slightly lighter than our jacket, so you can easily identify which areas we are working on.
[* black] Fold one of the long edges of the fabric over so that it is straight.

Imagen 1

Ninguna imagen anterior

Añadido

Imagen 2

Ninguna imagen anterior

Añadido