Saltar al contenido principal

Cambios a Paso #5

Editado por Jake Devincenzi

Edicion aprobada por Jake Devincenzi

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Turn the jacket inside out.
[* black] Measure the width of the baffle you're working on. In this case, each baffle looks like it is two inches wide.
[* black] We are replacing two baffles, so we will need just over four inches of fabric to patch.
[* black] Measure the length of the baffle (along the baffle seam). In our casecase, the baffle length is nine inchesinches, and since our repair is in the sleeve, we will double this to eighteen inches for the length of our scrap.
[* black] Measure the length of the baffle (along the baffle seam). In our casecase, the baffle length is nine inchesinches, and since our repair is in the sleeve, we will double this to eighteen inches for the length of our scrap.