Saltar al contenido principal

Cambios al paso #10

Editado por Ben Steel

Edicion aprobada por Jeff Suovanen

Sin cambios

Líneas de Paso

-[* black] Using the tweezers, gently pull the ribbon from the logic board.
+[* black] Use a spudger/tweezers/fingernail to unlatch the LCD ribbon port by pulling the grey tabs on the sides upwards (towards the top edge of the PCB).
+[* black] Once the LCD ribbon port has been unlatched, the LCD ribbon should very easily slide out and can be removed with zero force using fingers or tweezers.