Saltar al contenido principal

Cambios al paso #1

Editado por Nicole Giusti

Edicion aprobada por Nicole Giusti

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Open the phone at a 90 degree angle.
-[* red] Locate the two 1.5mm #000 Phillips screws on the outside of each hinge. Note: The phone needs to be open at a 90 degree angle in order to do this.
+[* icon_note] Open the phone at a 90 degree angle. This needs to be done in order to reach the screws.
+[* red] Locate the two 1.5mm #000 Phillips screws on the outside of each hinge.
[* black] Remove the two 1.5mm #000 Phillips screws with a Phillips #000 screwdriver.