Saltar al contenido principal

Cambios al paso #1

Editado por Nicole Giusti

Edicion aprobada por Nicole Giusti

Antes
Después
Sin cambios

Líneas de Paso

[* black] Open the phone at a 90 degree angle.
-[* red] Locate the two 1.5mm Phillips screws on the outside of each hinge. Note: The phone needs to be open at a 90 degree angle in order to do this.
-[* black] Remove the two 1.5mm Phillips screws with a Phillips #000 screwdriver.
+[* red] Locate the two 1.5mm #000 Phillips screws on the outside of each hinge. Note: The phone needs to be open at a 90 degree angle in order to do this.
+[* black] Remove the two 1.5mm #000 Phillips screws with a Phillips #000 screwdriver.