Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #8

Editado por Bradley

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] After the last step you'llstep, you will have a clear view of the logic board.
[* icon_caution] From here on outout, extreme care is necessary to avoid damaging components of the devicedevice and its components.
[* red] A small ribbon connects the start and select buttons to the power source on the lower portion of the logic board. It can rip very easily so don'tso, do not pull on it.
[* black] If you removedWith the faceplate removed as previously instructed you'llinstructed, you will be able to pull the front metal cover from the device. Please remove the front cover nowDo so.
[* icon_note] Once the cover's offoff, the plastic the on/off switch will fall out of place.
[* black] After the last step you'llstep, you will have a clear view of the logic board.
[* icon_caution] From here on outout, extreme care is necessary to avoid damaging components of the devicedevice and its components.
[* red] A small ribbon connects the start and select buttons to the power source on the lower portion of the logic board. It can rip very easily so don'tso, do not pull on it.
[* black] If you removedWith the faceplate removed as previously instructed you'llinstructed, you will be able to pull the front metal cover from the device. Please remove the front cover nowDo so.
[* icon_note] Once the cover's offoff, the plastic the on/off switch will fall out of place.