Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #8

Editado por Jack

Aprobación pendiente

Sin cambios

Líneas de Paso

[* black] After the last step you'll have a clear view of the logic board.
[* icon_caution] From here on out extreme care is necessary to avoid damaging components of the device.
[* red] A small ribbon connects the start and select buttons to the power source on the lower portion of the logic board. It can rip very easily so don't pull on it.
[* black] If you removed the faceplate as previously instructed you'll be able to pull the front metal cover from the device. Please remove the front cover now.
[* icon_note] Once the cover's off the plastic the on/off switch will fall out of place, make sure you keep an eye on it.