Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #7

Editado por David Hodson

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] WithTo remove the screws removed, we have to get rid of this small metal plate. Removing this plate can be a bit tricky so don't get discouraged/frustrated.
[* black] At this point, we'll have to lift
plate, the logic board up to pullmust be removed from the plate outfront case.
[* black] WithTo remove the screws removed, we have to get rid of this small metal plate. Removing this plate can be a bit tricky so don't get discouraged/frustrated.
[* black] At this point, we'll have to lift
plate, the logic board up to pullmust be removed from the plate outfront case.
[* icon_caution] With one hand, gently slide the top left end of the board up and out of the device.
[* yellow] With your other hand, pull the plate out until the tab comes out of the device.
[* black] Once the tab is pulled out from the bottom, slide the metal plate down and out from the device.