Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #7

Editado por Bradley —

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] With the screws removed, we have to get rid of this small metal plate. Removing this plate can be a bit tricky so don't get discouraged/frustrated.
[* black] At this pointpoint, we'll have to lift the logic board up to pull the plate out.
[* icon_caution] VeryWith one hand, gently slide the top left end of the board up and out of the device with one handdevice.
[* black] At this pointpoint, we'll have to lift the logic board up to pull the plate out.
[* icon_caution] VeryWith one hand, gently slide the top left end of the board up and out of the device with one handdevice.
[* yellow] With your other hand, pull the plate out until the tab comes out of the device.
[* black] Once the tab is pulled out from the bottom justbottom, slide the metal plate down and out from the device.
[* black] Once the tab is pulled out from the bottom justbottom, slide the metal plate down and out from the device.