Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #7

Editado por David Hodson

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] To remove the metal plate, the logic board must be lifted from the front case.
[*
black] With one hand, gently slide the top left end of the logic board up and out of the devicefront case.
[* yellow] With your other hand, pull the plateEMI shield out until the tab comes out of the devicefront case.
[* black] Once the tab is pulled out from the bottom, slide the metal plateEMI shield down and out from the device.
[* black] To remove the metal plate, the logic board must be lifted from the front case.
[*
black] With one hand, gently slide the top left end of the logic board up and out of the devicefront case.
[* yellow] With your other hand, pull the plateEMI shield out until the tab comes out of the devicefront case.
[* black] Once the tab is pulled out from the bottom, slide the metal plateEMI shield down and out from the device.

Imagen 1

Versión Antigua

Nueva Versión

Imagen 2

Versión Antigua

Nueva Versión

Imagen 3

Eliminado