Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #5

Editado por David Hodson

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] To remove the plastic guard, grab the edges and lift off the device.
[* yellow] The right edge of the plastic guard has a clip which holds it down. Using the spudger, depress on the clip and pull outthe plastic guard off of the logic board.
[* yellow] The right edge of the plastic guard has a clip which holds it down. Using the spudger, depress on the clip and pull outthe plastic guard off of the logic board.
[* red] The next step will have you remove two #00 Phillips screws on the logic board.