Cambios al paso #5
Editado por MangoRepair —
Edicion aprobada por MangoRepair
- Antes
- Después
- Sin cambios
Líneas de Paso
| + | [title] Seperate the circuit board |
|---|---|
| [* black] Being mindful of all the connections, lift the circuit-board out entirely of the chassis so you can access the ribbon connectors. | |
| [* black] Peel off the insulator tape above the connectors. | |
| [* black] Disconnect each ribbon cable. The middle connector and the wide connector both have latches that lift/hinges upwards to release the cable. The remaining connector pulls forwards slightly. |