Cambios al paso #2
Editado por Nathan Balcom —
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* icon_caution] Gently separate the top of LCD from the rest of the camera. |
|---|---|
| + | [* black] Gently separate the top of LCD from the rest of the camera using your thumb. |
| + | [* icon_caution] Be careful not pull the LCD too far because of the ribbon cable connection. |
| [* black] Place the Spudger in the hole of the electrical ribbon. | |
| - | [* black] Gently pull the ribbon down until it is free from the camera but still connected to the LCD. |
| + | [* black] Gently pull the ribbon down using the Spudger until it is free from the camera but still connected to the LCD. |
| [* icon_note] The LCD will still be connected to the rest of the camera |